Parallel grippers Series CGP
- Camozzi
- Movement
- Grippers
- Parallel grippers Series CGP
Download PDF (507,1 Kb
Magnetic Sizes 10 - 16 - 20 - 25 - 32
Series general data
| Model |
CGP-10 CGP-16 CGP-20 CGP-25 CGP-32 |
| Bore sizes (mm) |
Ø 10 Ø 16 Ø 20 Ø 25 Ø 32 |
| Type of operation |
double-acting |
| Operating pressure |
1.5 ÷ 7 bar |
| Operating temperature |
0°C ÷ 80°C |
| Max. operating frequency |
180 cycles/min |
| Lubrication |
lever section - lubrication required on sliding section |
| Opening stroke (mm) |
Ø 10 = 4 Ø 16 = 8 Ø 20 = 12 Ø 25 = 14 Ø 32 =16 |
| Theoritical holding force - opening (N) |
Ø 10 = 8 Ø 16 = 24 Ø 20 = 47 Ø 25 = 75 Ø 32 = 100 P = Related to a pressure of 5 bar with gripping point length 3 cm |
| Theoritical holding force - closing (N) |
Ø 10 = 5 Ø 16 = 8 Ø 25 = 35 Ø 25 = 60 Ø 32 = 85 P = Related to a pressure of 5 bar with gripping point length 3 cm |
| Length of max gripping point L (cm) |
3,0 4,0 6,0 7,0 8,5 L = Related to a pressure of 5 bar |
| Weight(g) |
Ø 10 = 50 Ø 16 = 140 Ø 20 = 250 Ø 25 = 410 Ø 32 = 680 |
| Port sizes |
M5 (CGP-10 M3) |
| Fluid |
filtered air, without lubrication* *in the event that lubricated air is used, it is recommended to use oil ISO VG32. Once applied, the lubrication should never be interrupted. |
Code
CGP
|
SERIES
|
20
|
SIZES
10 = ø 10 mm
16 = ø 16 mm
20 = ø 20 mm
25 = ø 25 mm
32 = ø 32 mm
|
