Cylinders with integrated guide Series QCTF and QCBF
- Camozzi
- Movement
- Guided cylinders
- Cylinders with integrated guide Series QCTF and QCBF
Download PDF (652,7 Kb
Double-acting, magnetic piston, with double bearings and flanges ø 20, 25, 32, 40
Series general data
| Type of construction |
compact guided with extended guide rods and double bearings/flanges QCTF = sintered bronze bushes QCBF = linear ball bearings |
| Operation |
double-acting |
| Materials |
body = anodized AL flanges = zinc-plated steel piston rod = rolled stainless steel AISI QCTF columns = rolled stainless steel 420B QCBF columns = hardened steel C50 seals = PU |
| Mounting |
threaded and non threaded holes in the body |
| Strokes min. max |
( see table) |
| Operating temperature |
0°C ÷ 80°C ( with dry air -20°C) |
| Speed |
50 ÷ 500 mm/s |
| Stroke end cushioning Type A |
extended stroke - fixed mechanical cushioning retracted stroke - fixed mechanical cushioning we recommend preventing the piston from striking against the end covers |
| Stroke end cushioning Type B |
extended stroke - shock absorber retracted stroke - shock absorber |
| Stroke end cushioning Type C |
extended stroke - shock absorber retracted stroke - fixed mechanical cushioning we recommend preventing the piston from striking against the end covers |
| Operating pressure |
1 ÷ 10 bar |
| Fluid |
clean air, non lubricated. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. |
Code
QC
|
SERIES
|
T
|
TYPE OF BEARING
T = sintered bronze bushes
B = linear ball bearings
|
F
|
INSTALLATION TYPE
F = body mounted with moving flanges
|
2
|
OPERATIONS
2 = double-acting
|
A
|
MATERIALS
A = anodized aluminium body rolled stainless steel piston rod 303 rolled stainless steel
420B colums QCT hardened steel C50 colums QCB
|
020
|
BORE
020 = 20 mm
025 = 25 mm
032 = 32 mm
040 = 40 mm
|
A
|
CUSHION
A = fixed mechanical cushion (standard)
B = two shock absorbers located on the body
C = one shock absorber located on the rear flange
|
050
|
STROKE
see table
|
