Deprecated: mysql_connect(): The mysql extension is deprecated and will be removed in the future: use mysqli or PDO instead in /home/archycoi/public_html/config/connection.php on line 8
Cylinders Series 60 - PT. Golden Archy Sakti - Leading Pneumatic and Industrial Automation Company in Indonesia
Indonesia
English

Cylinders Series 60



Download PDF (1.807,7 Kb

Series general data


Type of construction with tie-rods
Operation double-acting, single-acting, tandem. Low friction version: double-acting only.
Materials standard = AL end-blocks, rolled stainless steel rod AISI 420B, anodized AL tube, zinc-plated steel nuts and tie-rods, PU seals;
low friction = standard materials with NBR piston seal and NBR rod seal (FKM rod seal on request)
Type of mounting with tie-rods, with front / rear flange, foot mounting, with centre / front / rear / swivel trunnion
Strokes min - max 10 ÷ 2500 mm
Operating temperature 0°C ÷ 80°C (with dry air - 20°C)
Operating pressure 1 ÷ 10 bar (standard versions) 0,1 ÷ 10 bar (low friction version)
Speed 10 ÷ 1000 mm/sec, no load (standard versions) 5 ÷ 1000 mm/sec, no load (low friction version)
Fluid filtered air, without lubrication. For standard versions only: if lubricated air is used, it is recommended to use oil ISOVG32.
Once applied the lubrication should never be interrupted.

Code

60 M 2 L 050 A 0200  

 


60
SERIES
M
VERSIONS:
M = magnetic 
N = non magnetic
L = low friction
2
OPERATION 
1 = single-acting, front spring
2 = double-acting *, front and rear cushioned
3 = double-acting *, no cushion
4 = double-acting *, rear cushioned
5 = double-acting *, front cushioned
6 = double-acting *, through-rod, front and rear cushioned
7 = single-acting, through-rod

* all double-acting cylinders are also available in the low friction version.
L
MATERIALS:
L = see the GENERAL DATA table on page 1/1.20.01
T = stainless steel nuts AISI 303 - stainless steel tie-rods AISI 420B - for other materials see the GENERAL DATA table on page 1/1.20.01
050
BORE:
032 = 32 mm
040 = 40 mm
050 = 50 mm
063 = 63 mm
080 = 80 mm
100 = 100 mm
125 = 125 mm
A
CONSTRUCTION:
A = standard with lock nut for rod  
RL = cylinder with rod lock 
F = cylinder with centre trunnion
020
STROKE:
see table
 
   = standard
V = FKM rod seal
N = tandem
R = NBR rod seal
W = all FKM seals ÷130C°
L = low friction version without rod seal (rear supply only) *

* The possibility to order the cylinder without piston rod seal, further reduces the friction force, 
(this configuration is possible in applications where the cylinder ispressurized in the rear chamber only).