Compact magnetic cylinders Series 32
- Camozzi
- Movement
- Cylinders according standards
- Compact magnetic cylinders Series 32
Download PDF (2.165,2 Kb
Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100.
Series general data
| Construction |
compact profile |
| Operation |
single and double acting, magnetic |
| Materials |
body and end-blocks = anodized AL rod = rolled stainless steel AISI 303 piston = AL rod seal, OR end-block and piston seal = PU high temperatures: rod seal, OR end-block and piston in FKM (140°) |
| Mounting |
with threaded holes on the end blocks flange - feet - trunnion |
| Stroke min and max (1) |
Series 32F, 32M, 32R Ø20-25 = 5-300 mm Series 32F, 32M, 32R Ø32-40-50-63 = 5-400 mm Series 32F, 32M, 32R Ø80-100 = 5-500 mm |
| Operating temperature |
0°C ÷ 80°C (with dry air -20°C) |
| Operating pressure |
1 ÷ 10 bar (double-acting) / 2÷10 bar (single-acting) |
| Fluid |
clean air without lubrication. If lubricated air is used it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. |
| Operation speed |
10 ÷ 1000mm/sec. (without load) |
Code
32
|
SERIES
|
M
|
VERSION
M = male thread
F = female thread
R = antirotation with flange (not single-acting)
|
2
|
OPERATION
1 = single-acting
2 = double-acting
3 = double-acting through rod
4 = single-acting rear spring
|
A
|
MATERIALS
anodized aluminium body, end blocks and piston – rod seal, OR end block and piston seal in PU
|
032
|
BORES
020 = 20 mm
025 = 25 mm
032 = 32 mm
040 = 40 mm
050 = 50 mm
063 = 63 mm
080 = 80 mm
100 = 100 mm
|
A
|
CONSTRUCTION
A = standard
|
050
|
STROKE
in mm - see table
|
| |
= standard
S = special
V = FKM rod seal
W = high temperatures (double-acting, non-magnetic with FKM seals for high temperatures 140°C)
|
