3-Finger centric grippers Series CGC
- Camozzi
- Movement
- Grippers
- 3-Finger centric grippers Series CGC
Download PDF (594,7 Kb
Magnetic Sizes 50 - 64 - 80 - 100 - 125
Series general data
| Model |
CGC-50; CGC-64; CGC-80; CGC-100; CGC-125 |
| Bore sizes |
Ø 32 Ø 45 Ø 58 Ø 77 Ø 98 |
| Type of operation |
double-acting |
| Materials |
housing: high tensile special hard-coated aluminium alloy, Functional parts: hardened steel |
| Operating pressure (bar) |
2 ÷ 7 bar |
| Operating temperature |
5°C ÷ 60°C |
| Repeatability |
+/- 0,05 mm |
| Max. operating frequency |
60 cycles/min |
| Lubrication |
lever section lubrication required on sliding section |
| Theoritical holding force (N) with gripping point at 30 mm with 5 bar opening |
Ø 32 = 78, Ø 45 = 185 Ø 58 = 340, Ø77 = 580 Ø 98 = 940 |
| Theoritical holding force (N) with gripping point at 30 mm with 5 bar closing |
Ø 32 = 68, Ø 45 = 160 Ø 58 =290, Ø 77= 510 Ø 98 = 860 |
| Weight (g) |
Ø 32 = 230, Ø 45 = 410 Ø 58 = 800, Ø 77= 1400 Ø 98 = 2400 |
| Stroke per finger (mm) |
Ø 32 = 4, Ø 45 = 6 Ø 58 = 8, Ø 77 = 10 Ø 98 = 13 |
| Port sizes |
Ø 32- 45 -58 - M5 Ø 77 - Ø 98 -G1/8 |
| Fluid |
filtered air without lubrication. If lubricated air is used, it is recommended to use oil ISO VG32. Once applied, the lubrication should never be interrupted. |
Code
CGC
|
SERIES
|
050
|
SIZE
050 = 32 mm
064 = 45 mm
080 = 58 mm
100 = 77 mm
125 = 98 mm
|
