Compact magnetic cylinders Series 31
- Camozzi
- Movement
- Compact cylinders / Short stroke cylinders
- Compact magnetic cylinders Series 31
Download PDF (1.690,3 Kb
Double and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 ø 32, 40, 50, 63, 80, 100 UNITOP
Series general data
| Type of construction |
compact profile |
| Operation |
single and double-acting |
| Materials |
body and end-blocks = AL - rod = rolled stainless steel AISI 303 - piston rod = AL - seals = PU or FKM for high temperatures (140°C) |
| Brackets |
flange, feet, trunnion |
| Stroke min - max |
Series 31R, 31M and 31F: ø12÷25 = 1÷200mm, ø32 ÷ 63 = 1÷300 mm, ø80÷100 = 1÷400mm The min. stroke for the use of sensors is 10 mm. |
| Operating temperature |
0°C ÷ 80°C (with dry air - 20°C) |
| Operating pressure |
1 ÷ 10 bar (double-acting); 2 ÷ 10 bar (single-acting) |
| Fluid |
filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. |
| Speed |
10 ÷ 1000 mm/sec (without load) |
Code
31
|
SERIES
31 = compact magnetic
|
M
|
VERSION
M = male rod thread
F = female rod thread
R = non-rotating with flange only double-acting
|
2
|
OPERATION
1 = single-acting front spring
2 = double-acting
3 = double-acting through-rod
4 = single-acting rear spring
|
A
|
MATERIALS
A = rolled stainless steel AISI 303 rod tube profile aluminum
|
032
|
BORE
012 = 12 mm
016 = 16 mm
020 = 20 mm
025 = 25 mm
032 = 32 mm
040 = 40 mm
050 = 50 mm
063 = 63 mm
080 = 80 mm
100 = 100 mm
|
A
|
DESIGN TYPE
A = standard
|
050
|
STROKE
(see table)
|
| |
= standard
S = special
V = rod seal FKM
W = seals in FKM for high temperatures (140°C) double-acting, non magnetic
|
